#1
Posted 07 July 2010 - 01:45 PM
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs148.snc4/36745_406170006793_745161793_4587141_8306904_n.jpg
Started to pull all the bits off. Its screwwed and glued. Unlike the hasbro. Be careful.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs078.snc4/35246_406352231793_745161793_4593577_3135316_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs015.snc4/34136_406352261793_745161793_4593579_2892925_n.jpg
Next is wire up an led and micro switch to the trigger and 3.5mm jack for louder audio.
#5
Posted 08 July 2010 - 12:17 PM
Located a micro switch behind the trigger for the red led in the barrel. Managed to stuff the original speaker. But got another from jaycar for a couple of dollars.
http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs082.ash2/37463_406715431793_745161793_4602035_5520705_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs139.snc4/37267_406715021793_745161793_4602015_54290_n.jpg
#6
Posted 08 July 2010 - 10:51 PM
------------
Some sound options.. [for anyone reading really]
- 2w SEA amp.. $20, probably do for this... though having trooped with it, I MUCH prefer the Aker for trooper amp. If you've already got one lying around after an upgrade to an Aker [much louder at 12w] .. you could shove it inside of bigger guns.. I might try and shove mine inside my BFG .... after I finish those 300 other projects I've got going atm ;)
- 3.5w Jaycar Amp .. $18. It's premade and in a fairly small package. Very basic wiring, ask me, troy, or steve if in trouble
- 12w Jaycar Amp .. $23. Slightly larger than the one above, but still pretty small.
5W 2" $16
20W[10W] 3" $23.70
8W 4Ω 2.5" $21.70
8W 8Ω 2.5" $21.70
5w 50 X 90mm $7.95
2w 40mm $8.95
4w 3.2" 4Ω&8Ω v$6.20
#7
Posted 09 July 2010 - 08:04 AM
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs046.snc4/34664_407235071793_745161793_4612583_6060137_n.jpg
the led works a treat. you can see the 3.5mm jack mounted above the grip.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs089.snc4/35791_407234956793_745161793_4612579_5881165_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs079.snc4/35301_407234876793_745161793_4612578_2145232_n.jpg
now time to find all the bits to add back on. as you can see on this converted mauser
http://www.starwars-tw.com/replica/saber/mr/E5-hansolo-blaster/E20050729%20022.jpg
http://www.starwars-tw.com/replica/saber/mr/E5-hansolo-blaster/E20050729%20015.jpg
so much for a quick sand and a paint.
#9
Posted 09 July 2010 - 04:48 PM
#10
Posted 09 July 2010 - 05:37 PM
Stu.
#11
Posted 09 July 2010 - 05:56 PM
#12
Posted 10 July 2010 - 09:43 AM
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs101.snc4/35428_407591451793_745161793_4620840_2659002_n.jpg
I drilled out the holes in the barrel and mounted another hex bolt under it. I put a washer on the scope end for depth and detail when painting.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs101.snc4/35396_407593321793_745161793_4620899_6268011_n.jpg
Then cut up an old gun scope for the ajustment mounts. its getting some weight in it now.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs162.snc4/37424_407591806793_745161793_4620862_4619544_n.jpg
#13
Posted 20 July 2010 - 04:31 PM
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs197.snc4/38212_410966781793_745161793_4702350_7804953_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs202.snc4/38440_410966596793_745161793_4702348_58314_n.jpg
#15
Posted 21 July 2010 - 12:35 PM
#16
Posted 07 September 2010 - 07:51 AM
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs613.snc4/59378_426711081793_745161793_5097103_5200569_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs425.snc4/46786_426711096793_745161793_5097104_4580151_n.jpg
just got some lite shading and the scope adjusters to glue on the scope.
#18
Posted 08 September 2010 - 08:43 AM
I only wish the scope on these rubies/hasbro were moulded with a clearance from the barrel

Help












